English 
| Quantity: | |
|---|---|
Digital Drop Package Testing Machine Single Wing Package Testing Equipment
Arms drop tester is mainly used in the inspection package in the transportation, loading and unloading process under the influence of drop impact degree, evaluation of package in the process of handling resistance to impact strength and the rationality of the packaging design, and drop testing machine with brake motor chain transmission, drive drop arm extension, drop height used in digital display height feet, fall highly accurate, display straight, view, the operation is simple Falling, falling arm movements smooth, Angle error is small, the machine is suitable for various manufacturers and quality inspection departments, etc.
Features:
The single-arm drop test machine can perform free drop test on the face, angle and edge of the package. It is equipped with a digital display height indicator and uses a decoder for height tracking, so that it can accurately give the product drop height and the preset drop height.The error does not exceed 2% or 10MM. This machine adopts single-arm double-column structure, with electric reset, electric control drop and electric lifting device, easy to use; the unique buffer device greatly improves the service life, stability and safety of the machine. Single arm setting, can easily place the product.
Technical parameters:
1. Drop height mm: 300-1500 adjustable
2. The maximum weight of the test piece kg: 80Kg;
3. Thickness of bottom plate: 10mm (solid iron plate)
4. Maximum size of test piece mm: 1000 x1000 x 800
5. Impact panel size mm: 1700 x 1200 x10
6. Drop height error: ± 10mm
7. Overall dimensions of test bench mm: about 1700 x 1200 x 2315
8. Support arm size: 180 * 180 * 10mm
9. Net weight kg: about 300kg;
10. Test method: face, angle and edge drop in all directions
11. Control mode: electric
12. Falling height error: 1%
13. Parallel error of impact panel: ≤1 degree
14. The angle error between the falling surface and the horizontal during the falling process: ≤1 degree
15. Power supply: 380V1, power supply: AC380V 50HZ
16. Power: 1.85KWA
Environment requirements:
Temperature: 5 ℃ ～ + 28 ℃ (average temperature ≤28 ℃ within 24 hours)
Relative humidity: ≤85% RH
Power supply conditions: three-phase four-wire + protective earth,
Voltage range: AC (380 ± 38) V
Digital Drop Package Testing Machine Single Wing Package Testing Equipment
Arms drop tester is mainly used in the inspection package in the transportation, loading and unloading process under the influence of drop impact degree, evaluation of package in the process of handling resistance to impact strength and the rationality of the packaging design, and drop testing machine with brake motor chain transmission, drive drop arm extension, drop height used in digital display height feet, fall highly accurate, display straight, view, the operation is simple Falling, falling arm movements smooth, Angle error is small, the machine is suitable for various manufacturers and quality inspection departments, etc.
Features:
The single-arm drop test machine can perform free drop test on the face, angle and edge of the package. It is equipped with a digital display height indicator and uses a decoder for height tracking, so that it can accurately give the product drop height and the preset drop height.The error does not exceed 2% or 10MM. This machine adopts single-arm double-column structure, with electric reset, electric control drop and electric lifting device, easy to use; the unique buffer device greatly improves the service life, stability and safety of the machine. Single arm setting, can easily place the product.
Technical parameters:
1. Drop height mm: 300-1500 adjustable
2. The maximum weight of the test piece kg: 80Kg;
3. Thickness of bottom plate: 10mm (solid iron plate)
4. Maximum size of test piece mm: 1000 x1000 x 800
5. Impact panel size mm: 1700 x 1200 x10
6. Drop height error: ± 10mm
7. Overall dimensions of test bench mm: about 1700 x 1200 x 2315
8. Support arm size: 180 * 180 * 10mm
9. Net weight kg: about 300kg;
10. Test method: face, angle and edge drop in all directions
11. Control mode: electric
12. Falling height error: 1%
13. Parallel error of impact panel: ≤1 degree
14. The angle error between the falling surface and the horizontal during the falling process: ≤1 degree
15. Power supply: 380V1, power supply: AC380V 50HZ
16. Power: 1.85KWA
Environment requirements:
Temperature: 5 ℃ ～ + 28 ℃ (average temperature ≤28 ℃ within 24 hours)
Relative humidity: ≤85% RH
Power supply conditions: three-phase four-wire + protective earth,
Voltage range: AC (380 ± 38) V
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.