2 Tapping Positions Bulk Density Tester & Apparatus Bulk Density Tester & Apparatus
Application:
Powder density refers to the mass corresponding to a unit volume of powder. Because there are voids (or pores) between particles or within particles, the density of the powder is usually less than the true density of the corresponding substance. The tapped density refers to the density after the powder contained in the container is tapped under prescribed conditions.
DY-100A,B,C Powder density tester consist of adjustable-speed motor,vibration
assembly,micro-computer and micro printer.,etc.It has the feature of compact
structure,stable,and easy operation.,etc.
Specification:
(1) Weight of testing object:<=500.00g
(2) Volume of testing object:<=250.00ml(standard accessory including
25ml,50ml,100ml,250ml measuring cylinder)
(3) Single vibration times:<=0-99999 times(the result will come out as bulk density when input zero times)
(4) Allowable motor force:0.86 N.m.
(5) Vibration frequency:maximum 300 round per minute(0-300 round per minute is adjustable,USA pharmacopeia standard is 300 round per minute)
(6) Vibration amplitude:maximum 15mm(1mm-15mm is adjustable,International standard is 3mm)
(7) Repeatability error:<=1%
(8) Accuracy error:<=1%
Features:
1.Drop Height-Easily Adjustment
The drop height is important for a tap density tester in order to meet different international standards.This tap density tester uses default 3mm height and some tapping washers in specific height to reach 14mm.They changes easily without opening the cover.
2.Working Panel-Intuitive
The intuitive LED and membrane working panel brings operator and easy and fast operation.Accurate to 4 decimals.Automatically saving all test information.Operator simply inputs the desired data and press start to test.
3.Rpm-Easily Adjustment
The rpm is also important for a tap density tester.This instrument uses a speed control to realize 250rpm and 300 rpm.The motor is default 300 rpm,just tun the knob and reach the right percentage to shift to 250rpm.
4.Analysis Result-Easily Printed
Integrated micro printer prints the test data after test including Sample No,weight,volume,tap number,tap density and operator.
5.Cover-Easily to Clean
The outer surface is plastic coated,it is strong and resistant to any powders non-corrosive or corrosive.It makes for the cleaning procedure as well as a longer working life.
DY-100D Powder Density Tester
Introduction:
DY-100D powder density tester is based on GB/T 5162-2006/ISO3953:1993,ASTM B527.
This instrument consist of motor,vibration assembly,timer.,etc.It has the feature of adjustable setting vibration times,small angle rotation of vibration assembly to get even materials.
Specification:
Weight of testing object:<=500.00g
Volume of testing object:<=250.00ml
Single vibration times:<=0-14750 times
Allowable motor force:0.86 N.m.
Vibration amplitude:3mm
Repeatability error:<=1%
Accuracy error:<=1%
Power supply:220V(50/60Hz),40W
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.