Glass Taber Wear Test DIN53754 Taber Abrasion Resistance Test 250g 500g 750g Load
Application:
Taber Abrasion Tester is widely used to evaluate wear resistance. It can conduct tests on a wide range of materials such as: cloth, paper, paint, plywood, leather, tile, glass, rubber etc. It tests the specimen by rotating it while in contact with the grinding wheel and applying the required pressure. The Loss of weight reflects on the change in weight of the specimen.
Standards:
DIN 53754, 53799, 53109, 52347, TAPPI T476, SATM D3884, ISO 5470
Specification:
1.Testing sheet:inner diameter(D)3mm
2.Abrasion wheel:φ2"(Max.45mm)(W)1/2"
3.Centre interval for abrasion wheel :63.5mm
4.Interval for abrasion wheel and testing sheet:37~38mm
5.Rotating speed:60-72r/min(can be adjustable)
6.Load:250,500,750g
7.Counter:LED 0~999,9999
8.Distance from testing sheet to suction inlet:3mm
9.Dimension:45 x 35 x 42cm
10.Weight:30kg
11.Power supply:AC 220V,10A
12.One pair of imported grinding wheel H-18;One set of cleaner
Grind Wheel Selection:
Materials | Coating | Flooring | Plywood | Plastic,Leather | Cloth |
Grinding Wheel | CS10,CS17 | CS17,H18 | S-32,S-33 | H18,H22,CS17 | H18,H22,CS17 |