Lab Small Injection Molding Machine Vertical 2 Tons Injection Force
Application:
In a cycle of the plastic injection machine, a certain amount of plastic can be heated and plasticized within a specified time, and the molten plastic can be injected into the mold cavity through a screw under a certain pressure and speed.
Main Parameters:
Program
| Description
| UNIT | KSU-250-ST |
Injection unit
| Screw Diameter | mm | 22 | 26 | 30 |
Injection Pressure | kg/cm2 | 2300 | 1800 | 1600 |
Max.Shot Weight(PS) | g | 45 | 60 | 71 |
Injection Rate | mm | 125 |
Screw Speed Max. | Turn | 0-260 |
Nozzle Retraction | mm | 170 |
Number of temperature Control | Snt | 3/4 |
Clamping unit
| Clamping Force | Tons | 35 |
Platen Size | mm | 550*380 |
Distance Between Tie Bere | mm | 370*205 |
Min.Mold Height | mm | 60/120 |
Opening Stroke | mm | 200 |
Max. Open daylight | mm | 260/320 |
Ejection Force | Tons | 2 |
Power\Heading unit
| Max. Hydraulic Pressure | kg/cm2 | 140 |
Pump discharge volume | 1/min | 36 |
Pump Motor power | kw/HP | 4/5 |
Electric heating capacity | kw | 2.3 |
Total electricity consumption | kw | 6.3 |
Other | Machine Weight | kg | 1300 |
Machine Dimensions(L*W*H) | m | 1.6*1*2.5 |