Lab Testing Equipment DIN Rubber Leather And Plastic Abrasion Resistance Tester
Application
Rubber Shoes DIN Abrasion Resistance Tester is to test the friction of surface by a particular piece of sandpaper, After friction for a certain time, and then assess the condition of material surface, weight,
volume and thickness, from this standard to assess the abrasive nature of materials.
Standards
DIN-53516,ISO/DIS-4649,GB-9867
Main function:
This Rubber Shoes DIN Abrasion Resistance Tester is a high efficiency, good reproducibility and
easy to operate, applied to test the abrasive nature of material, as such elastic material, rubber, tires,
convey belt, transmit belt, sole, synthetic leather, leather and others.
Specifications
Roller diameter | φ150mm |
Roller length | 460mm |
Rotate speed | 40rpm |
Abrasion stroke | 40mm(20mm) |
Abrasion speed | 0.32m/sec |
Dip angle | 3° |
Specimen diameter | φ16 mm |
Thickness | 6~15 mm |
Testing load | 5N,10N |
Clamp horizontal displacement | 4.2mm/roll each lap |
Standard accessories | one set of sampler,two pieces of abrasive |
paper(VSM60#,41*47.6CM),three pieces of standard gel(φ16*8mm),one piece of power cord. |