Needle Flame Testing Machine Tester Flammability Chamber with IEC60335 IEC60112
This product is used for electrical products affected by damp and environment under the influence of impurity, or between the live parts of different polarity between live parts and grounded (earthed) metal parts may cause the leakage on the insulation, produced by the arc to electrical breakdown caused by short circuit or due to discharge the material erosion, and even lead to fire.
Features:
The electrode head of the test chamber is made of platinum metal, which is resistant to high temperature and corrosion, accurate counting of drops, stable and reliable control system.
Standards:
IEC60335、GB4706.1、IEC60884-1、GB2099.1、GB/T4207-2003、IEC60112、ASTM D 3638-92
Specification:
1) Electrode pressure: 1.0±0.05N
2) Electrode distance: 4.0mm ± 0.01mm, angle 60°±5
3) The electrode voltage of the leakage tracking test device is adjustable from 100 to 600V (48~60HZ), and the voltage drop is less than 10% when the short-circuit current is 1.0±0.1A.
4) Drop height: adjustable from 30~40mm
5) Drop size: 44~55 drops/1cm3 adjustable
6) Dropping time: 30s ± 5s
7) The number of drops: 0~9999 times adjustable
8) Electric trace index test instrument leakage judgment: the loop current is greater than 0.5A and maintained for 2 seconds, the relay action cuts off the current, indicating that the sample is unqualified
9) Electrical trace index test machine test process: automatic control of test procedures, independent ventilation
10) Electric trace index test instrument studio volume: 0.1m3 (can be customized according to different standards 0.5 m3 or 0.75m3)
11) Outer dimensions of equipment: 630mm wide × 390mm deep × 750mm high
12) Power supply: AC 220V, 50Hz
Guangdong Hongtuo Instrument Technology Co.,Ltd has been specializing in density testing field on developing, innovating and producing since the year it was establised.